%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% CHARACTER SET: ISO 8859-1 (Latin 1)
%
% ISO 8859-1 is the system character set used by Unix/X Windows and
% MS Windows.
%
% SORTING ORDER: Latin countries
%
% Alphabetical sorting order of Aa..Zz (including accented characters).
%
% This is a BibTeX Codepage and Sort definition file (CSF). It is
% used to define the 8-bit character set used by BibTeX and the
% order in which those characters should be sorted. The file
% format is documented below this header section.
%
% This file will only work with the 8-bit implementation of BibTeX
% written by Niel Kempson and Alejandro Aguilar-Sierra:
%
% http://www.ctan.org/tex-archive/biblio/bibtex/8-bit/
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% FILE FORMAT
%
% The codepage and sorting order (CS) file defines how BibTeX will treat an
% 8-bit character set, specifically which characters are to be treated as
% letters, the upper/lower case relationships between characters, and the
% sorting order of characters.
%
% The CS file may contain a number of sections, each presented in the
% form of a TeX macro:
%
% \section-name{
% <section definitions>
% }
%
% Four sections are currently supported: \lowupcase, \lowercase, \uppercase
% and \order. The syntax of the four supported sections is summarised below.
%
% 8-bit characters may be entered naturally, but to avoid problems with
% character set translation or corruption, they can also be entered using
% the TeX-style portable notation for character codes, i.e. ^^XX, where XX
% is the hexadecimal value ofthe character code.
%
% Reading of the sections ends when the first '}' character is reached, so
% '}' can't be included in a section. You can't use ^^7d either.
%
% The percent sign ('%') is used to introduce a trailing comment - it and
% all remaining characters on a line are ignored. ^^25 has the same effect.
%
%
% \lowupcase section
%
% The \lowupcase section of the CS file is used to define the lower
% /upper and upper/lower case relationship of pairs of specified
% characters. It is only used if the relationship is symmetrical - use
% \lowercase or \upcase if it isn't.
%
% The syntax of the \lowupcase section is:
%
% \lowupcase{
% <LC-1> <UC-1> % Comment begins with a percent sign
% <LC-2> <UC-2>
% ...
% <LC-N> <UC-N>
% }
%
% Each <LC-n> <UC-n> pair of characters defines that the upper case
% equivalent of <LC-n> is <UC-n> *and* the lower case equivalent of
% <UC-n> is <LC-n>.
%
% You cannot redefine the lower or upper case equivalent of an ASCII
% character (code < 128), so all instances of <LC-n> and <UC-n>
% (i.e. both sides of the relationship) must have codes > 127.
%
%
% \lowercase section
%
% The \lowercase section of the CS file is used to define the lower case
% equivalent of specified characters. It should normally only be used
% if the relationship isn't symmetrical - use \lowupcase if it is.
%
% The syntax of the \lowercase section is:
%
% \lowercase{
% <UC-1> <LC-1> % Comment begins with a percent sign
% <UC-2> <LC-2>
% ...
% <UC-N> <LC-N>
% }
%
% Each <LC-n> <UC-n> pair of characters defines that the lower case
% equivalent of <UC-n> is <LC-n>.
%
% You cannot redefine the lower case equivalent of an ASCII character
% (code < 128), so all instances of <UC-n> (i.e. the left hand side
% of the relationship) must have codes > 127.
%
%
% \uppercase section
%
% The \uppercase section of the CS file is used to define the upper case
% equivalent of specified characters. It should normally only be used
% if the relationship isn't symmetrical - use \lowupcase if it is.
%
% The syntax of the \uppercase section is:
%
% \uppercase{
% <LC-1> <UC-1> % Comment begins with a percent sign
% <LC-2> <UC-2>
% ...
% <LC-N> <UC-N>
% }
%
% Each <LC-n> <UC-n> pair of characters defines that the upper case
% case equivalent of <LC-n> is <UC-n>.
%
% You cannot redefine the upper case equivalent of an ASCII character
% (code < 128), so all instances of <LC-n> (i.e. the left hand side
% of the relationship) must have codes > 127.
%
%
% \order section
%
% The \order section of the CS file is used to define the order in which
% characters are sorted.
%
% The syntax of the \order section is:
%
% \order{
% <char-1> % Comment begins with a percent sign
% <char-2> <char-3> % whitespace between the chars
% <char-4> - <char-5> % a hyphen between the chars
% <char-4> _ <char-5> % an underscore between the chars
% ...
% <char-n>
% }
%
% All characters on the same line are given the same sorting weight.
%
% The construct <char-1> <underscore> <char-2> is used to denote that
% all characters in the range <char-1> to <char-2> should be given the
% same sorting weight. For example, "A _ Z" would cause all ASCII
% upper case alphabetical characters to have the same sorting weight
% and would be equivalent to placing all 26 characters on the same line.
%
% The construct <char-1> <hyphen> <char-2> is used to denote that all
% characters in the range <char-1> to <char-2> should be given an
% ascending set of sorting weights, starting with <char-1> and ending
% with <char-2>. For example, "A - Z" would cause all upper case ASCII
% alphabetical characters to be sorted in ascending order and would be
% equivalent to placing 'A' on the first line, 'B' on the second,
% through to 'Z' on the 26th line.
%
% The characters at the beginning of the order section are given a lower
% sorting weight than characters occuring later. When sorting
% alphabetically, characters with the lowest weight come first.
%
% All characters not in the \order section (including ASCII characters)
% are given the same very high sorting weight to ensure that they come
% last when sorting alphabetically.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% CHARACTER SET
\lowupcase{ % Lowercase Uppercase
% Code TeX Code TeX
%
� � % ^^e0 \`{a} ^^c0 \`{A}
� � % ^^e1 \'{a} ^^c1 \'{A}
� � % ^^e2 \^{a} ^^c2 \^{A}
� � % ^^e3 \~{a} ^^c3 \~{A}
� � % ^^e4 \"{a} ^^c4 \"{A}
� � % ^^e5 \aa ^^c5 \AA
� � % ^^e6 \ae ^^c6 \AE
� � % ^^e7 \c{c} ^^c7 \c{C}
� � % ^^e8 \`{e} ^^c8 \`{E}
� � % ^^e9 \'{e} ^^c9 \'{E}
� � % ^^ea \^{e} ^^ca \^{E}
� � % ^^eb \"{e} ^^cb \"{E}
� � % ^^ec \`{\i} ^^cc \`{I}
� � % ^^ed \'{\i} ^^cd \'{I}
� � % ^^ee \^{\i} ^^ce \^{I}
� � % ^^ef \"{\i} ^^cf \"{I}
� � % ^^f0 \dh ^^d0 \DH
� � % ^^f1 \~{n} ^^d1 \~{N}
� � % ^^f2 \`{o} ^^d2 \`{O}
� � % ^^f3 \'{o} ^^d3 \'{O}
� � % ^^f4 \^{o} ^^d4 \^{O}
� � % ^^f5 \~{o} ^^d5 \~{O}
� � % ^^f6 \"{o} ^^d6 \"{O}
� � % ^^f8 \o ^^d8 \O
� � % ^^f9 \`{u} ^^d9 \`{U}
� � % ^^fa \'{u} ^^da \'{U}
� � % ^^fb \^{u} ^^db \^{U}
� � % ^^fc \"{u} ^^dc \"{U}
� � % ^^fd \'{y} ^^dd \'{Y}
� � % ^^fe \th ^^de \TH
}
% SORTING ORDER
\order{
0-9
A
� � � � � � �
a
� � � � � � �
B
b
C �
c �
D �
d �
E
� � � �
e
� � � �
F
f
G
g
H
h
I
� � � �
i
� � � �
J
j
K
k
L
l
M
m
N �
n �
O
� � � � � �
o
� � � � � �
P
p
Q
q
R
r
S
s �
T �
t �
U
� � � �
u
� � � �
V
v
W
w
X
x
Y
�
y
� �
Z
z
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% END OF FILE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%