R for Windows Build Tools Archive

This document is a collection of resources that were used in the past for building packages for R under Microsoft Windows, and for building R itself (version 1.9.0 to 4.1.3). The original collection was put together by Prof. Brian Ripley and Duncan Murdoch, later by Jeroen Ooms.

Instructions for the current version of R can be found on the Rtools homepage. The authoritative source of information for tools to work with the current release of R is the "R Administration and Installation" manual. In particular, please read the "Windows Toolset" appendix.

Rtools Downloads

Some of the tools are incompatible with obsolete versions of R. We maintain one actively updated version of the tools, and other "frozen" snapshots of them. We recommend that users use the latest release of Rtools with the latest release of R.

The last version of this (history) file is recorded here: VERSION.txt.

Download R compatibility Frozen?
Windows 64-bit: rtools40-x86_64.exe (recommended: includes both i386 and x64 compilers)
Windows 32-bit: rtools40-i686.exe (i386 compilers only)
R 4.0.x to 4.1.x Yes
Rtools35.exe R 3.3.x to 3.6.x Yes
Rtools34.exe R 3.3.x to 3.6.x Yes
Rtools33.exe R 3.2.x to 3.3.x Yes
Rtools32.exe R 3.1.x to 3.2.x Yes
Rtools31.exe R 3.0.x to 3.1.x Yes
Rtools30.exe R > 2.15.1 to R 3.0.x Yes
Rtools215.exe R > 2.14.1 to R 2.15.1 Yes
Rtools214.exe R 2.13.x or R 2.14.x Yes
Rtools213.exe R 2.13.x Yes
Rtools212.exe R 2.12.x Yes
Rtools211.exe R 2.10.x or R 2.11.x Yes
Rtools210.exe R 2.9.x or 2.10.x Yes
Rtools29.exe R 2.8.x or R 2.9.x Yes
Rtools28.exe R 2.7.x or R 2.8.x Yes
Rtools27.exe R 2.6.x or R 2.7.x Yes
Rtools26.exe R 2.6.x, R 2.5.x or (untested) earlier Yes

The change history to the Rtools is below.

Tools for 64 bit Windows builds

Rtools 2.12 and later include both 32 bit and 64 bit tools.

Most of the tools used for 32 bit builds work fine as well for 64 bit builds, but the gcc version may be different, and it has changed a number of times.

R 3.3.0 and later use a toolchain based on gcc 4.9.3 and mingw-w64 v3, put together by Jeroen Ooms and others. See the project page for details.

R-patched subsequent to Jan 22, 2012, R-devel, and releases after 2.14.1 used a toolchain based on pre-4.6.3 gcc, put together by Prof. Brian Ripley and available as multi.zip on his web page. Rtools 2.15 to 3.3 includes this toolchain. It uses the same gcc version for both 32 and 64 bit builds. Separate versions of the gdb debugger are also included for each archtecture.

Builds of R 2.13.x and R 2.14.{0,1} used a release based on pre-4.5.2 gcc. Rtools 2.14 includes binaries put together by Prof. Brian Ripley and available from his web page. To install these, select the "MinGW64" component when installing Rtools.

For the later R 2.11.x versions, we used the MinGW-w64 version based on pre-4.4.4 gcc from Prof. Ripley, which is no longer available. We also used this version for development builds of R 2.12.0 up to July 20.

R 2.11.0 used http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Automated%20Builds/mingw-w64-1.0-bin_i686-mingw_20100322.zip, but this is apparently no longer available for download.

To install any of these older versions, follow the instructions on Prof. Ripley's web page.


There are a number of downloads described in the "Windows Toolset" appendix.

To build packages:

Optional additions:

For building R, all of the above, plus:

After running the Rtools installer, follow the instructions in Rtools.txt to complete your installation.

Special situations

Obtaining the R source code

There are two ways to obtain the R source code: from the Subversion repository, and from CRAN in a compressed tar file.

Subversion is an open source version control system. After obtaining and installing it, you can obtain the latest development source using

    svn checkout https://svn.R-project.org/R/trunk [RDEVEL-HOME]

which will install it into the specified directory. (Normally you would use a different home directory for this unstable development code than you would use for a released version of R.)

Alternatively, compressed tar files containing the source may be downloaded from CRAN. Do remember to unpack the sources by using our tar: WinZip will not respect the symbolic links in the file. A typical tar command line would be:

    tar xzvf R-2.14.1.tar.gz


Modified sources of gdbm-1.8.3 are available for experiments with Luke Tierney's gdbm package.

Change History

Changes since R 3.3.0

The version number has been updated to 3.4.x.y.

Support for the gcc 4.6.3 toolchain has been dropped.

We have updated Tcl/TK to version 8.6.4. If you are using Rtools34 to build R 3.3.x, you will need to change




in R_HOME/src/gnuwin32/fixed/etc/Makeconf.

Changes since R 3.2.2

Both the gcc 4.6.3 toolchain and a toolchain based on gcc 4.9.3 and mingw-w64 v3 are now included. For use with the newer toolchain a compiled copy of libicu55 is also included; it will be installed in Rtools/mingw_libs if the newer compilers are selected.

Changes since R 3.1.3

The version number has been updated to 3.3.x.y.

Rtools33 has been started. Due to test failures with gcc 4.9.2, it will not be used in R 3.2.0, and gcc 4.6.3 is included in Rtools33. We expect that gcc 4.9.2 or later will be included in a future release.

The 32 and 64 bit builds of the gdb debugger have been copied into the Rtools/bin directory as gdb.exe and gdb64.exe respectively. The copies in the gcc-4.6.3 remain, but will not be included when that compiler is dropped.

The scripts and cross-compiler used to build gcc 4.9.2 are available on CRAN and its mirrors in the bin/windows/Rtools/scripts directory, along with notes on the build.

The bitmap libraries have been removed; they are now downloaded and installed when building R by using make rsync-extsoft.

The Cygwin "cygpath.exe" utility has been added to Rtools/bin; this allows conversion between Cygwin-style paths used in shell scripts and native Windows-style paths.

Changes since R 3.1.2

The version number has been updated to 3.2.x.y.

The Cygwin tools have been updated to versions current as of January 7, 2015.

R version 3.2.0 will require texinfo 5.2 to build the manuals, and it has been added to the tools. It will also require a copy of Perl, which is NOT included in the tools. By default the manuals will no longer be built; follow the instructions in src/gnuwin32/MkRules.dist if you would like to build them.

Changes since R 3.0.2

The Cygwin tools have been updated to versions current as of November 19, 2013. Cygwin now builds separate 32 bit and 64 bit versions; we include 32 bit versions of the tools. If your system only has 64 bit Cygwin DLLs installed, you will need to add our Cygwin DLLs to your path (or install the 32 bit Cygwin DLLs into Cygwin).

The bitmap library libpng has been updated to version 1.6.9.

Changes since R 3.0.0

The version number has been updated to 3.1.x.y.

We now record the minimum supported R version in the registry data in entry "MinRVersion" within the Rtools/X.Y key. Earlier versions of R should use an earlier version of Rtools. This value may be less than the minimum listed in the table above. The table is a promise to try to maintain compatibility; this value is what we actually maintained.

We also record the full version number, e.g., in entry "FullVersion" in the registry.

Changes since R 2.15.2

The bitmap libraries have been updated to libpng 1.5.13, libtiff 4.0.3 and jpeg-9. The version number has been changed from 2.16.x to 3.0.x, following the R renumbering.

Changes since R 2.15.1

The bitmap libraries have been updated to jpeg-8d, libpng 1.5.12, and libtiff 4.0.2. The Cygwin tools have been updated to versions current as of July 13, 2012. NB: some of the tools now require you to have a HOME environment variable, listing your home directory. One way you can create it in a Windows command shell is by using
Rtools 2.15 has been frozen.

Changes since R 2.14.1

The pre-4.6.3 toolchain has been updated to fix a bug in the sqrt() function. R now uses pre-4.6.3 gcc for all current builds, and that is the only version included in Rtools 2.15.

Changes since R 2.14.0

The new toolchain based on gcc pre-4.5.4 has been added.

Changes since R 2.13.1

The Info-zip utilities have been updated: zip.exe is now version 3.0, unzip.exe is version 6.00. Rtools 2.13 has been frozen.

Changes since R 2.12.2

We have updated all of the tools to current Cygwin versions as of March 25, 2011. We added the "du" utility from Cygwin. We have dropped Vanilla Perl. The libjpeg version has been updated to 8c, and libpng has been updated to 1.5.1. Rtools 2.12 has been frozen. We have added the Rtools version number to Rtools.txt and to a new file, VERSION.txt.

Changes since R 2.11.1

Prior to October 18, 2010, builds of Rtools212.exe did not correctly install the "extras" required to build R. Version or later should fix this. We have now updated all of the tools to current Cygwin versions, and have updated the compilers, and included the 64 bit compilers into Rtools. See Prof. Ripley's page for the details. Perl is rarely needed in R since R 2.12.0, so it is by default not installed. Rtools 2.11 has been frozen.

Changes since R 2.11.0

The 32 bit version of R-devel (to become R 2.12.0 in fall, 2010) will be built with gcc 4.5.x, so Rtools212 contains a completely new MinGW toolchain based on gcc 4.5.0. Current plans are to continue building R 2.11.x and patches to it with Rtools211, based on gcc 4.2.1.

Changes since R 2.10.1

Rtools210 was frozen, and Rtools211 has been introduced containing the following changes:

We have updated Tcl/TK to version 8.5.8.

Versions 6b, 7 and 8 of libjpeg have been dropped, and version 8a has been added.

We have updated libpng to version 1.4.1

Changes since R 2.9.2

Rtools29 was frozen, and Rtools210 has been introduced containing the following changes.

We have updated tar to version 1.21.

We have updated the libpng library to libpng-1.2.40.

We have added version 7 of libjpeg.

We have updated to version 5.3.5 (Unicode) of Inno Setup

We have added the "file" command.

Changes since R 2.8.1

We have updated the Cygwin utilities and DLLs, the MinGW utilities, and the Tcl/Tk files to current versions as of February 18, 2009.

Changes since R 2.8.0

We have frozen Rtools28.exe, and introduced Rtools29.exe.

Changes since R 2.7.2

We have updated the Cygwin utilities and DLLs to current versions as of September 5, 2008.

We have updated libpng (used in building R) to version 1.2.31.

Changes since R 2.7.0

We have updated the Cygwin utilities and DLLs to current versions as of May 21, 2008.

The installer no longer requires a reboot if the PATH is changed, and won't suggest adding Rtools at the head of the PATH if it is already there.

We have started the 2.8 series of installers, dropping support for R 2.6.x and earlier.

The installer now sets registry entries like those of R, so that other tools can find it. Only fixes to this code will affect Rtools27.exe, the contents are otherwise frozen.

Changes since R 2.6.2

The installer now includes versions 8.4.15 (for R up to 2.6.x) and 8.5.2 (for R 2.7.x or later) of the TCL/TK bundle, and iconv.dll version 1.12.

Inno Setup 5.2.3 is now used.

The libtiff library 3.8.2 has been added (for TIFF support in 2.7.0), and the libpng library has been updated to version 1.2.25.

Changes since R 2.6.1

The Win32 API files have been updated to version 3.11.

The MinGW run-time has been updated to version 3.14.

Both versions 8.4.15 (for R up to 2.6.x) and 8.5.0 (for R 2.7.x or later) of the TCL/TK bundle are now included in the installer.

The installer now detects incomplete Cygwin uninstalls, and removes the leftover mount information that caused bugs in our build tools. It also allows manual editing of the system PATH.

The Cygwin tools have been updated to current versions, as of January 18, 2008. Dates on files have been reset to the original dates, rather than a build date of Rtools27.exe.

Changes since R 2.6.0

Support for gcc 3.4.5 has been dropped. For the life of R 2.6.x, both "GCC4_SUFF=-sjlj" and "GCC4_SUFF=" will be supported; subsequently, the gcc 4.2.1 tools will not include the suffix.

The Win32 API files have been updated to version 3.10.

Changes since R 2.5.1

The Rtools installer now includes both MinGW gcc versions 3.4.5 (used for R versions 2.5.x) and 4.2.1 (used for R 2.6.x and later), as well as Vanilla Perl. See the Rtools.txt file for the latest information.

tools.zip and R_Tcl.zip are no longer being distributed, now that they have been merged into the Rtools installer.

The MinGW run-time has been updated to version 3.13.

Inno Setup has been updated to version 5.1.14.

The binary tools have been updated to current Cygwin versions (except custom versions, as noted in the README.txt file).

Changes since R 2.5.0

Inno Setup version 5.1.12 is now used (for Windows Vista compatibility).

The TCL/TK bundle has been updated to version 8.4.15, and now includes the manuals in CHM help format.

Changes since R 2.4.1

Warning: the current MinGW releases will not run in Microsoft Vista.

We have just put together an experimental Rtools installer. This packages up the R tools bundle, the MinGW tools, and the TCL/TK, Unicode and bitmap support. It does not include Perl, LaTeX, the HTML Help Workshop, or the Inno Setup installer.

We no longer recommend using the pre-packaged MinGW versions; it is hard to keep track of which versions they package. Instead we recommend using the installer above or downloading the components directly from the versions on the Sourceforge download page.

Changes since R 2.4.0

MinGW run-time version 3.11 or higher is now required.

Inno Setup version 5.1.7 or higher is now required.

Changes since R 2.3.1

The iconv.zip internationalization library has been updated to version 1.11.

The R_Tcl.zip files for Tcl/Tk support have been updated to version 8.4.13.

mingw-runtime >= 3.10 is required to build R (a bug fix in the handing of MBCS code is required). This is enforced by a check in building Rpwd.exe.

Our daily builds no longer use the patched version of ld.exe, we use a newer version of the unpatched utility. We have not tested the new setup on Windows NT4. If you are using that OS and the builds do not work, please let us know.

Changes since R 2.2.1

- The cmp utility is required to build R; a copy has been added to tools.zip [NB: tools.zip is no longer distributed].

- There is a bug in the MinGW ld.exe linker utility version 2.16.91 20050827. This bug does not affect the linking method used in R up to 2.2.x, but is likely to affect the method used in R 2.3.x or higher, making such builds fail to run on Windows NT 4 systems. Our daily builds are now using the patched version, but it is not included in the Rtools collection. See the instructions below to obtain and install a copy of the patched version.

Changes since R 2.1.1

The following changes have been made since the release of R 2.1.1:

- The R_Tcl.zip files for tcl/tk support have been updated to version 8.4.11.

- Version 3.4.4 of the MinGW gcc compilers, 3.8 of the MinGW runtime, 2.15.94 of the MinGW binutils, and 3.3 of the w32api are now used in builds.

- A broken version of tar.exe has finally been replaced in tools.zip [NB: tools.zip is no longer distributed].

- The MinGW tools are now available in a file named MinGW-5.0.0.exe on the MinGW website. Choose the "candidate" packages. This will download and install mingw-runtime-3.8.tar.gz, w32api-3.3.tar.gz, binutils-2.16.91-20050827-1.tar.gz, gcc-core-3.4.4-20050522-1.tar.gz, gcc-g++-3.4.4-20050522-1.tar.gz, and gcc-g77-3.4.4-20050522-1.tar.gz.

- Inno setup 5.1.5 or better is needed to build the installer.

Changes since R 2.1.0

The following changes have been made since the release of the R 2.1.0 Installation and Administration manual:

- Version 5.1.2 or better of the Inno Setup installer (currently in beta testing) is now required for r-patched and r-devel, and is expected to be required for future releases.

- The head utility is now needed to build R; a copy has been added to tools.zip [NB: tools.zip is no longer distributed].